This system has comprehensive monitoring and control functions. It can display the status, position, and emergency start - up time of lamps in real - time, automatically and continuously detect the normal operation of communication power supply lines, system components, etc. It can switch all connected lamps to the emergency state manually or automatically, display various power parameters of the centralized power supply and distribution box and put them into the emergency working state. When the communication lines between the controller and the centralized power supply or distribution box are open - circuit or short - circuit, or when the lamps malfunction, it will emit fault audio - visual signals and indicate the fault location. It can also manually control the evacuation route to guide people to escape. Moreover, the system uses lithium iron phosphate batteries as the battery, which are highly safe, small - sized, lightweight, have high energy density, long lifespan, and are environmentally friendly.
Technical Specifications
Rated power supply voltage: AC220V (AC187V~AC242V)
Rated operating frequency: 50Hz
Main power consumption: 5W
Battery specification: Lithium iron phosphate battery, 3.2V/3300mAh, 1 cell
Emergency working time: Not less than 3 hours
Display device category: 2.8-inch liquid crystal display
Capacity limit: 4 (centralized power supply, distribution box) × 8 (loops) × 60 = 1920 points
Communication interface: 1 CAN, 1 expandable CAN2/RS485 communication card bus communication interface
Protection level: IP43
Operating environment: Temperature 0°C~55°C, relative humidity ≤95%RH