The TX7140 Addressable Manual Call point use a non-breakable glass which is designed to press under light pressure triggering the call point into an alarm condition, with LED indicator mounted onto the front face to simplify the location of an operated call point. Safe to press and no hammer is required. The protected flap on the lower part is used for reset through supplied special tool.
Listed : LPCB / CE-CPR
Compliance : EN 54-11:2001 + A1:2005
Power Rating
Input Voltage : 24VDC [16V to 28V]
Current Consumption Standby : 0.6mA, Alarm: 1.8mA
Call Point
Protocol/Addressing : T&A, Value range from 1 to 254
Indicator : Single LED / Steady On-when pressed
Material / Colour : Fireproof ABS / RED Glossy finishing
Dimension : 89 mm x 93 mm x 35 mm
Weight : 102g (with Base), 80g (without Base)
Class : Type A, Indoors
Operating Temperature : -10°C to +55°C
Ingress Protection Rating : IP43
Humidity : 0 to 95% Relative Humidity, Non condensing