The unit manufactured base on the requirement of EN 54 part 3, European Standard. The addressable flashing beacon base is aesthetically pleasing with unobtrusive design that will complement modern building designs and its plug-in type assembles make installation and maintenance more convenient to the installer. The addressable flashing beacon base is compatible to the TX7004 Analogue Intelligent Fire Alarm Control Panel, produced by single manufacture T&A, to avoid addressable communication compatibility problem.
• EN54-3 Compliance
• Built-in MCU processor and digital addressing
• 17 tones Programmable sound output
• Encoding modes such as Single-encoding Mode, Dual-encoding
• Mode 1 and Dual- encoding Mode 2
• Programmable Evacuate or Pre-alarm/Evacuate signal
• 8 highlights LED status cluster
• Be started directly by a detector
• Onsite adjustable parameters
• Loop power input
• Aesthetically pleasing design
• Universal mounting with fix base for simple installatio
Listed | LPCB Pending |
Compliance | EN54-3 |
Power Rating | |
Input Voltage | Loop Power: 24VDC [16V to 28V] |
Current Consumption | Loop: Standby: ≤0.8mA, Alarm: ≤5mA |
Sounder | |
Protocol/Addressing | T&A, Value range from 1 to 254 |
Address Sequence | Single-encoding Mode: Alarm |
Dual-encoding Mode 1 | 1st Alarm / 2nd Warning |
Dual-encoding Mode 2 | 1st Warning / 2nd Alarm |
Strobe Light | 8 Highlights LED |
Material / Colour | ABS / White Glossy finishing |
Dimension / Height | Diameter 140 mm / 59.1 (with a cover) |
Weight | 194g (with a cover), 176g (without a cover) |
Class | Type A, Indoors |
Operating Temperature | -10°C to +50°C |
Ingress Protection Rating | IP30 |
Humidity | 0 to 95% Relative Humidity, Non condensing |